Zed-Bull Transponder key Programming Device
#1
02-24-2010 | 08:54 AM
Thread Starter
|
Junior Member
Joined: Feb 2010
Posts: 1
Zed-Bull Transponder key Programming Device
Dear Sirs
Today the most advanced and working device name is Zed-Bull
And it is Made In Turkey
And this is the full specifications for it
1 - Read the full range of all kinds of Transponder chips ((4C, ((4D60, 4D61, 4D62, 4D63, 4D64,4D65, 4D67.4D68)) 46,48, T5, 44.7945,7931,8 E, 8C,48,48 magic II, . ..
2 Till you the transponder chip status if it is locked, or open ( New )
3 Read the new CAN chips for Audi , Volkswagen
4 Read the 48 Megamos and unlock the lock chips for the 48 Megamos and 48 magic II
So you can use them again on another car
Because if it is locked you can't reuse them anymore and it will be useless
5 - Read the chassis number for BMW keys for all models and also it can reads the kilometer and the number of the key
6 It can program the original new remote for BMW with no need to put a transponder chip inside the remote
And also no need to open the remote and damage it any more by this tool
7 It can Read the TPX chips and copy it which belong to JMA co. and told you the car kind and the full details about it.
8 - and also it can read silica EH1, EH2 Transponder keys
9 - Read the 46 transponder chips with the full types and tell you if it is locked, or open
10 - Read the Pin Code for Renault and Peugeot (some species) through the key without the car
11 - it can copy transponder chips (11 - 12 - 13 - 33 73 ) to T5 chips
12 It can copy 4C chips to SILCA EH2 Head, TPX chips and battery chips
13 - copies all types of 4D chips to silica EH2, OR JMA TPX chips and battery chips
14 - It can program the old Mercedes Benz chips for C,E which can start the can direct with no need to program it on the car and you can start the car on 5 seconds.
15 - turn the types of chips from one species to another: to 4D 61,62,63,64,65,67 or 68
and another types for 4D,33,13,46
16 - turn 7936 chips (46) to many kinds, including the Peugeot 2007 and Chevrolet, Nissan, Chrysler, Porsche, Renault, Peugeot, Opel, Nissan, Citroen, Volkswagen, Porsche and Audi a lot and so the cost of the chips get less than the price of natural to you and provide more than half their prices.
17 give you the Pin code for Kia and Hyundai via 6 last digit of the car chasses no.
and this work for cars up to model 2006.
18 have a Catalog for Transponder for all cars and species up to 2010, where each car type gives you what is required chips and the IC which need to been programmed
19 it can teach how to program car remotes manual for each car, programmed manually, without having to buy books or programs to teach them and pay for each car.
20 have inside it Hitage II software which come with it free and no need to buy the hitage II alone which the price of the original price of it is between 1000 USD
21 it have a program to modified BIN files ((((FREE))))
22 - The possibility to save the customer key data on a list for the future and copy it after that with no need to the car.
23 - gives you the No. of the IC which required for programming and status and illustration with pictures and also it give you the picture of the car key.
24 - the possibility for updating the device throw the internet by a fast way.
25 - It can program keys for bikes such as Suzuki and Honda and Ducati bikes...........
26 - have a catalog which can tell you the type of chips on devices such as the famous ((SILCA RW4, JMA CLONER ... ...
27 have five different languages until now.
28 - Just as it had got a new tool ZED-PROG
Which If you add it to the Zed-Bull it can read a lot of IC and most of them without to open them and solder them
29 - As the newly released a new OBD device for many different cars
Including Toyota, Chevrolet, Opel, Renault, Peugeot ........
EEPROM AND MCU APPLICATIONS:
Programming a new key or a copy to each car on the list located on the catalog
And all of the application can't been programmed using T-code or sbb or another tool like it
and also it is able to give you the pin code if you would like to program it using another tool
It have 76 software for MCU until now which can been programmed by the ecu or the immo box
This information is complete for the device
To find the cars which the device can make , please download the Zed-Bull Catalog
By this pages
http://www.albarakakey.com/files/obd...t_zed-bull.pdf
http://www.albarakakey.com/files/alb...ll_catalog.pdf
There is also a comparison between it and more popular devices and shows the specifications of each of them
http://www.albarakakey.com/files/alb...ll_compare.pdf
For More details about the device please check this page
http://www.albarakakey.com/download.html
if you are interested on this tool or any others please dont hesitate to contact us
Zed-Bull@albarakakey.com
00971506466398
00971506326605
Today the most advanced and working device name is Zed-Bull
And it is Made In Turkey
And this is the full specifications for it
1 - Read the full range of all kinds of Transponder chips ((4C, ((4D60, 4D61, 4D62, 4D63, 4D64,4D65, 4D67.4D68)) 46,48, T5, 44.7945,7931,8 E, 8C,48,48 magic II, . ..
2 Till you the transponder chip status if it is locked, or open ( New )
3 Read the new CAN chips for Audi , Volkswagen
4 Read the 48 Megamos and unlock the lock chips for the 48 Megamos and 48 magic II
So you can use them again on another car
Because if it is locked you can't reuse them anymore and it will be useless
5 - Read the chassis number for BMW keys for all models and also it can reads the kilometer and the number of the key
6 It can program the original new remote for BMW with no need to put a transponder chip inside the remote
And also no need to open the remote and damage it any more by this tool
7 It can Read the TPX chips and copy it which belong to JMA co. and told you the car kind and the full details about it.
8 - and also it can read silica EH1, EH2 Transponder keys
9 - Read the 46 transponder chips with the full types and tell you if it is locked, or open
10 - Read the Pin Code for Renault and Peugeot (some species) through the key without the car
11 - it can copy transponder chips (11 - 12 - 13 - 33 73 ) to T5 chips
12 It can copy 4C chips to SILCA EH2 Head, TPX chips and battery chips
13 - copies all types of 4D chips to silica EH2, OR JMA TPX chips and battery chips
14 - It can program the old Mercedes Benz chips for C,E which can start the can direct with no need to program it on the car and you can start the car on 5 seconds.
15 - turn the types of chips from one species to another: to 4D 61,62,63,64,65,67 or 68
and another types for 4D,33,13,46
16 - turn 7936 chips (46) to many kinds, including the Peugeot 2007 and Chevrolet, Nissan, Chrysler, Porsche, Renault, Peugeot, Opel, Nissan, Citroen, Volkswagen, Porsche and Audi a lot and so the cost of the chips get less than the price of natural to you and provide more than half their prices.
17 give you the Pin code for Kia and Hyundai via 6 last digit of the car chasses no.
and this work for cars up to model 2006.
18 have a Catalog for Transponder for all cars and species up to 2010, where each car type gives you what is required chips and the IC which need to been programmed
19 it can teach how to program car remotes manual for each car, programmed manually, without having to buy books or programs to teach them and pay for each car.
20 have inside it Hitage II software which come with it free and no need to buy the hitage II alone which the price of the original price of it is between 1000 USD
21 it have a program to modified BIN files ((((FREE))))
22 - The possibility to save the customer key data on a list for the future and copy it after that with no need to the car.
23 - gives you the No. of the IC which required for programming and status and illustration with pictures and also it give you the picture of the car key.
24 - the possibility for updating the device throw the internet by a fast way.
25 - It can program keys for bikes such as Suzuki and Honda and Ducati bikes...........
26 - have a catalog which can tell you the type of chips on devices such as the famous ((SILCA RW4, JMA CLONER ... ...
27 have five different languages until now.
28 - Just as it had got a new tool ZED-PROG
Which If you add it to the Zed-Bull it can read a lot of IC and most of them without to open them and solder them
29 - As the newly released a new OBD device for many different cars
Including Toyota, Chevrolet, Opel, Renault, Peugeot ........
EEPROM AND MCU APPLICATIONS:
Programming a new key or a copy to each car on the list located on the catalog
And all of the application can't been programmed using T-code or sbb or another tool like it
and also it is able to give you the pin code if you would like to program it using another tool
It have 76 software for MCU until now which can been programmed by the ecu or the immo box
This information is complete for the device
To find the cars which the device can make , please download the Zed-Bull Catalog
By this pages
http://www.albarakakey.com/files/obd...t_zed-bull.pdf
http://www.albarakakey.com/files/alb...ll_catalog.pdf
There is also a comparison between it and more popular devices and shows the specifications of each of them
http://www.albarakakey.com/files/alb...ll_compare.pdf
For More details about the device please check this page
http://www.albarakakey.com/download.html
if you are interested on this tool or any others please dont hesitate to contact us
Zed-Bull@albarakakey.com
00971506466398
00971506326605
Thread
Thread Starter
Forum
Replies
Last Post
